What DCGT 11T302 means, letter by letter: rhombic 55°, positive, 7° clearance, tolerance G, 40–60° countersunk hole, chipbreaker one side. Inscribed circle 9.525 mm, thickness 3.97 mm, nose radius 0.2 mm.
D1C2G3T4115T36027
1 · SHAPERhombic 55°D
2 · CLEARANCE7°C
3 · TOLERANCEClass Gtight, ground
4 · TYPET40–60° countersunk hole, chipbreaker one side
5 · SIZE11inscribed Ø 9.525 mm · cutting edge 11.6 mm
6 · THICKNESS3.97 mmT3
7 · NOSE RADIUS0.2 mm02
To scale: top view with the inscribed circle (blue dashes) and, on the right, the side view with the thickness. The grey dashes mark the chipbreaker; its real shape is up to the manufacturer.
DCGT 11T302 dimensions
Inscribed circle IC
9.525 mm
Cutting edge length
11.63 mm
Thickness s
3.97 mm
Nose radius rε
0.2 mm
Corner angle
55°
Clearance angle
7°
Tolerance G: IC / corner height / thickness
±0.025 / ±0.025 / ±0.13 mm
What DCGT 11T302 tells you on the shop floor
55° corner: gets into shoulders and follows profiles. For semi-finishing and finishing.
Positive insert (7°): lower cutting forces and less chatter. For finishing, boring, thin-walled parts and lighter machines.
Ground: a more precise edge, repeatable at every insert change. The choice for finishing and tight tolerances.
Small radius: lower forces and chatter, good finish at low feed.
Typical holders for DCGT
For a positive rhombic 55° insert the most common ISO 5608 holders are:
SDJCR/L · lead angle 93°
SDNCN · lead angle 62.5°
The final R or L means right or left hand. Shank size, length and the exact clamping are in the manufacturer's catalogue.
Designation to ISO 1832; reference tables: Mitsubishi Materials turning catalogue (insert identification). Holders to ISO 5608. Chipbreaker, grade and cutting data differ between manufacturers: the catalogue of the insert you use is what counts.
Got another code? Type it into the decoder and read it at once.
DCGT 11T302: rhombic 55°, positive, 7° clearance, tolerance G, 40–60° countersunk hole, chipbreaker one side. Inscribed circle 9.525 mm, thickness 3.97 mm, nose radius 0.2 mm.
What is the inscribed circle of DCGT 11T302?
9.525 mm, with a 11.6 mm cutting edge.
Which holder takes DCGT 11T302?
An ISO 5608 holder for positive rhombic 55° inserts, for example SDJCR/L or SDNCN.
What problem it solved, how much time it saves you, what is missing. We read everything. We only publish with your permission, and only the way you choose.
Thank you. We have it: if you allowed publishing, we will write to you to confirm before it goes online.