CNMG 250924 dimensions
| Inscribed circle IC | 25.4 mm |
| Cutting edge length | 25.79 mm |
| Thickness s | 9.52 mm |
| Nose radius rε | 2.4 mm |
| Corner angle | 80° |
| Clearance angle | 0° |
| Tolerance M | thickness ±0.13 mm |
| ANSI equivalent (inch) | CNMG 866 |
What CNMG 250924 tells you on the shop floor
80° corner: strong yet versatile, turns and faces with the same insert.
Double-sided negative insert: edges on both faces, stronger and cheaper per edge. Needs a rigid machine and clamping; not for small bores.
Pressed, medium tolerance: economical, fine for roughing and where you do not need repeatability to a few hundredths of a mm at every insert change.
Large radius: strong edge, takes high feeds. More radial force, watch slender parts.
Typical holders for CNMG
For a negative rhombic 80° insert the most common ISO 5608 holders are:
- PCLNR/L · lead angle 95°
- PCBNR/L · lead angle 75°
- DCLNR/L · lead angle 95°
The final R or L means right or left hand. Shank size, length and the exact clamping are in the manufacturer's catalogue.
In inches, with the ANSI designation, the same insert is CNMG 866: size in eighths of an inch, thickness in sixteenths, radius in sixty-fourths. Converting any code, both ways, is in ISO Inserts Pro.
Other CNMG sizes
- CNMG 120404
- CNMG 120408
- CNMG 120412
- CNMG 120416
- CNMG 160608
- CNMG 160612
- CNMG 160616
- CNMG 190608
- CNMG 190612
- CNMG 190616
Designation to ISO 1832; reference tables: Mitsubishi Materials turning catalogue (insert identification). Holders to ISO 5608. Chipbreaker, grade and cutting data differ between manufacturers: the catalogue of the insert you use is what counts.